> Printer (231)
> Printer > All-in-One Printer (138)
> Printer > Laser Printer (84)
> Printer > Printserver (6)
Review of Linux Compatibility
The All-in-One printer Brother DCP-J125G1 is connected by USB 2.0. The printer is recognized by the Linux kernel as:
Bus 002 Device 004: ID 04f9:0253 Brother Industries, Ltd
The necessary LPR and CUPS printer drivers can be downloaded at:
The installation of the Brother printer drivers in Ubuntu is described in detail on:
Linux also supports the included scanner by using the Brscan4 drivers. These drivers can be downloaded from Brother at:
The installation and configuration of the DCP-J125G1 for scanning via USB or WiFi is described at http://welcome.solutions.brother.com/bsc/public_s/id/linux/en/instruction_scn1.html.
Overview of brother driver files and a description of the installation of these drivers for Linux operating systems can be found at http://welcome.solutions.brother.com/bsc/public_s/id/linux/en/index.html.
The printer also includes a multi card reader, which is supported by the Linux kernel if the printer is connected to the USB port:
sd 8:0:0:0: Attached scsi generic sg4 type 0 scsi 9:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS scsi 9:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS scsi 9:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS scsi 9:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS sd 9:0:0:0: Attached scsi generic sg5 type 0 sd 9:0:0:1: Attached scsi generic sg6 type 0 sd 9:0:0:2: Attached scsi generic sg7 type 0 sd 9:0:0:3: Attached scsi generic sg8 type 0 sd 9:0:0:3: [sdi] Attached SCSI removable disk sd 9:0:0:0: [sdf] Attached SCSI removable disk sd 9:0:0:1: [sdg] Attached SCSI removable disk sd 9:0:0:2: [sdh] Attached SCSI removable disk
Identified Hardware Configurations (1 Result)This hardware component was used by Linux users under the following system configurations. These results were collected by our LHG Scan Tool: