> Network (216)
> Network > Ethernet (45)
> Network > PowerLAN / dLAN (1)
> Network > UMTS / GSM / HSDPA (17)
> Network > Wireless (151)
Review of Linux Compatibility
The USB 2.0 adapter D-Link DUB-E100 provides a RJ45 socket at an USB port. The adapter exists in at least four different versions (A4, B1, B1 alternate). All known verions are supported by the Linux Kernel since version 2.6.19, whereas the kernel 2.4 only supports the version A4.
All versions base on the ASIX 8817x chipset, which needs the kernel modules asix together with the module usbnet.
new high speed USB device using ehci_hcd and address 3 new device found, idVendor=2001, idProduct=3c05 new device strings: Mfr=1, Product=2, SerialNumber=3 Product: DUB-E100 Manufacturer: D-Link Corporation configuration #1 chosen from 1 choice
Each of the three versions has a different USB ID:
Version USB-ID ----------------------------- A4 0x2001:0x1A00 B1 0x07d1:0x3c05 B1 alternate 0x2001:0x3c05 Unknown 0x2001:0x1A02
Version B1 (2001:3c05)
Hence, the version B1 can be identified by lsusb in the following way:
Bus 001 Device 009: ID 2001:3c05 D-Link Corp. [hex]
Fourth Version (2001:1a02)
This version is identified by its USB ID 2001:1a02
Bus 001 Device 006: ID 2001:1a02 D-Link Corp.
and is also supported under Linux by using the asix kernel module as driver:
New USB device found, idVendor=2001, idProduct=1a02 New USB device strings: Mfr=1, Product=2, SerialNumber=3 Product: DUB-E100 Manufacturer: D-Link SerialNumber: D3830C eth1: register 'asix' at usb-0000:00:1d.7-4, ASIX AX88772 USB 2.0 Ethernet
Identified Hardware Configurations (1 Result)This hardware component was used by Linux users under the following system configurations. These results were collected by our LHG Scan Tool:
||ALT Linux 7.0.5 School Server||4.1.18-un-def-alt0.M70P.1||10/03/2016|