Edimax EW-7711In (150M, WiFi, 32-bit PCI Adapter)

Network 802.11n, Edimax, Network, PCI, WiFi

Edimax EW-7711In (150M, WiFi, 32-bit PCI Adapter)
Linux compatibility:
2 votes, average: 3.0 out of 52 votes, average: 3.0 out of 52 votes, average: 3.0 out of 52 votes, average: 3.0 out of 52 votes, average: 3.0 out of 5
  ( 3 with 2 ratings)

Price: $ 30.00 (on stock)
(without shipping costs)

 Buy from Amazon.com



Price trend
Edimax EW-7711In 
-
Minimum: $ 19.49 
Maximum: $ 53.75  
Updated: 02/04/2016 03:26

Review of Linux Compatibility

By using the PCI card EW-7711ln from Edimax the PC can be extended by 802.11n WiFi support.

Although the PCI card is recognized by the Linux kernel automatically:

03:02.0 Network controller: Ralink corp. RT3060 Wireless 802.11n 1T/1R

additional configuration is necessary to use the hardware.

Ubuntu tries to control the card via the module rt2800, which will fail with the following error message:

phy0 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware

Instead, the module rt3562sta has to be used. This module is not part of the kernel yet and has to be compiled and installed by hand. First step is to blacklist the loading of the wrong modul in the file /etc/modprobe.d/blacklist.conf:

blacklist rt2800pci
blacklist rt2800usb
blacklist rt2x00lib
blacklist rt2x00pci
blacklist rt2x00usb

The source code drivers (RT3062) can be found at the Edimax Homepage of the card.

Compilation of the driver is explained in detail at http://www.x-fish.org/blog/1201061/Linux:_Edimax_EW-7711In_unter_Linux_Mint_12/.

After compilation the kernel module can be loaded by the command modprobe:

sudo modprobe rt3562sta

Similar Linux Hardware

scroll left scroll right

Comments

Please use the comment section to submit corrections to the article as well as relevant excerpts of lspci, lsusb, lshw, dmesg e.t.c. Furthermore, use the section for the exchange of experiences with this hardware component or search for configuration help from other owners of this hardware.
 
Email address will not be published.
Submitting comment...