> Multimedia (301)
> Multimedia > CCTV (14)
> Multimedia > Misc (10)
> Multimedia > Radio (2)
> Multimedia > Sound (79)
> Multimedia > TV (123)
> Multimedia > Webcam (80)
Review of Linux Compatibility
The USB 2.0 Stick Nova TD from Hauppauge is equipped with two DVB-T tuners, connected to one antenna thanks to the incloded Y-link cable (i.e. two MCX connectors are combined into one IEC connector). Additionally the Win TV Nova TD has one infraread receiver, which can be used with LIRC.
The stick exists in two versions (model 95809 and model 52009), both supported by Linux since Ubuntu 8.10.
The hardware of the model 52009 is recognized by the Linux kernel (Linux version 3.2.0-24-generic-pae) in the following way:
usb 2-5: new high-speed USB device number 2 using ehci_hcd IR NEC protocol handler initialized dib0700: loaded with support for 21 different device-types dvb-usb: found a 'Hauppauge Nova-TD Stick (52009)' in cold state, will try to load a firmware IR RC5(x) protocol handler initialized dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw' IR RC6 protocol handler initialized IR JVC protocol handler initialized IR Sony protocol handler initialized IR MCE Keyboard/mouse protocol handler initialized lirc_dev: IR Remote Control driver registered, major 249 IR LIRC bridge handler initialized dib0700: firmware started successfully. dvb-usb: found a 'Hauppauge Nova-TD Stick (52009)' in warm state. dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Hauppauge Nova-TD Stick (52009)) DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)... DiB0070: successfully identified dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Hauppauge Nova-TD Stick (52009)) DVB: registering adapter 1 frontend 0 (DiBcom 7000PC)... DiB0070: successfully identified Registered IR keymap rc-dib0700-rc5 input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:13.2/usb2/2-5/rc/rc0/input12 rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:13.2/usb2/2-5/rc/rc0 dvb-usb: schedule remote query interval to 50 msecs. dvb-usb: Hauppauge Nova-TD Stick (52009) successfully initialized and connected. usbcore: registered new interface driver dvb_usb_dib0700
and a USB device is availabe at system level with the following USB ID:
Bus 002 Device 002: ID 2040:5200 Hauppauge
The double tuner is supported by the kernel module dvb_usb-dib0700:
dvb_usb_dib0700 84919 0 dib7000p 34072 3 dvb_usb_dib0700 dib0090 32688 1 dvb_usb_dib0700 ir_nec_decoder 12459 0 dib7000m 22965 1 dvb_usb_dib0700 dib0070 18150 3 dvb_usb_dib0700 dvb_usb 23826 1 dvb_usb_dib0700 dib8000 42093 1 dvb_usb_dib0700 dvb_core 94814 3 dib7000p,dvb_usb,dib8000 dib3000mc 22920 1 dvb_usb_dib0700 rc_core 21263 11 rc_dib0700_rc5,ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder, ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,dvb_usb_dib0700,ir_nec_decoder,dvb_usb dibx000_common 18418 5 dvb_usb_dib0700,dib7000p,dib7000m,dib8000,dib3000mc
The infraread receiver is accessed via the device file in /dev/input/event:
I: Bus=0003 Vendor=2040 Product=5200 Version=0001 N: Name="IR-receiver inside an USB DVB receiver" P: Phys=usb-0000:00:13.2-5/ir0 S: Sysfs=/devices/pci0000:00/0000:00:13.2/usb2/2-5/rc/rc0/input12 U: Uniq= H: Handlers=kbd event12 B: PROP=0 B: EV=100013 B: KEY=14afc336 284284d 0 0 0 4 80058000 2190 40000801 9e96c0 0 900200 ffc B: MSC=10
If the infraread receiver is used with LIRC the driver Treiber devinput has to be activated:
# /etc/lirc/hardware.conf # #Chosen Remote Control REMOTE="Hauppauge TV card" REMOTE_MODULES="lirc_dev lirc_i2c" REMOTE_DRIVER="devinput" REMOTE_DEVICE="/dev/input/event2" REMOTE_SOCKET="" REMOTE_LIRCD_CONF="/etc/lirc/hama.txt" REMOTE_LIRCD_ARGS=""
It can occur that at some PCs the numbering of the input devices (event1, event2, …) is reshuffled at each boot because the integrated hardware is not recognized in the same order at each boot. In this case the infraread reveicer should be accessed via its invariable USB ID, i.e. using “/dev/input/by-id/usb-...” instead of “/dev/input/eventX“.
A detailed description of the configuration of the module and the infraread receiver can be found at LinuxTV.org.
The tuner is delivered together with a USB extension cable, an adapter cable (IEC to two MCX connector to use only one DVB-T antenna for two tuners), a small DVB-T antenna (due to it small size this antenna will need to be exchanged with a bigger antenna in most cases), a infraread remote contral, and a manual (CD+paper).
Identified Hardware Configurations (2 Results)This hardware component was used by Linux users under the following system configurations. These results were collected by our LHG Scan Tool:
||Ubuntu 14.04.1 LTS||3.13.0-43-generic||-||20/12/2014|
||Ubuntu 14.04.1 LTS||3.13.0-39-generic||-||06/12/2014|